This is the exact embedded text of the captured official document.
Snapshot 8993a90a280b · verified 2026-08-23 ·
original document ·
archived snapshot ·
unofficial consolidation, the official version is held by the municipal clerk.
Search Results | Clear Search | Previous (in doc) | Next (in doc) | Prev Doc | Next Doc
| |
| --- |
| **License** |
Bylaw No. 3429-2023
## Sign Bylaw, 2023
| *Contents* | | |
| --- | --- | --- |
| Part 1 -- Administration | | |
| | | 1 Definitions |
| | | 2 Interpretation bylaw |
| | | 3 Purpose |
| | | 4 Figures |
| Part 2 -- Application | | |
| | | 5 Application |
| | | 6 Compliance |
| | | 7 Prohibited signs |
| | | 8 Non-conforming signs |
| Part 3 -- General Regulations | | |
| | | 9 General prohibitions |
| | | 10 Signs incorporating multiple sign types |
| | | 11 Third party advertising |
| | | 12 Illuminated signs |
| | | 13 Changeable copy |
| | | 14 Electronic copy |
| Part 4 -- Signs not requiring a permit | | |
| | | 15 Signs not requiring a permit |
| | | 16 Compliance with other requirements |
| | | 17 Address, commemorative or public information signs |
| | | 18 Agricultural local product signs |
| | | 19 Banner signs |
| | | 20 Community activity signs |
| | | 21 Construction project signs |
| | | 22 Contractor identification signs |
| | | 23 Directional signs |
| | | 24 Home occupation signs |
| | | 25 Identification signs |
| | | 26 Promotional signs |
| | | 27 Real estate directional signs |
| | | 28 Real estate signs |
| | | 29 Sandwich board signs |
| | | 30 Window signs |
| Part 5 -- Sign districts | | |
| | | 31 Sign districts |
| | | 32 Sign district locations |
| | Division 1 -- Mixed use centres sign district | || | | 33 Sign design in the mixed use centres sign district |
| | | 34 Sign materials in the mixed use centres sign district |
| | | 35 Awning signs in the mixed use centres sign district |
| | | 36 Canopy signs in the mixed use centres sign district |
| | | 37 Drive through menu board signs in the mixed use centres sign district |
| | | 38 Electronic message board signs in the mixed use centres sign district |
| | | 39 Facade signs in the mixed use centres sign district |
| | | 40 Freestanding signs in the mixed use centres sign district |
| | | 41 Marquee signs in the mixed use centres sign district |
| | | 42 Mural signs in the mixed use centres sign district |
| | | 43 Projecting signs in the mixed use centres sign district |
| | | 44 Service station canopy signs in the mixed use centres sign district |
| | | 45 Suspended signs in the mixed use centres sign district |
| | Division 2 -- Historic downtown sign district | || | | 46 Sign design in the historic downtown sign district |
| | | 47 Sign colours in the historic downtown sign district |
| | | 48 Sign materials in the historic downtown sign district |
| | | 49 Awning signs in the historic downtown sign district |
| | | 50 Canopy signs in the historic downtown sign district |
| | | 51 Facade signs in the historic downtown sign district |
| | | 52 Freestanding signs in the historic downtown sign district |
| | | 53 Marquee signs in the historic downtown sign district |
| | | 54 Projecting signs in the historic downtown sign district |
| | | 55 Service station canopy signs in the historic downtown sign district |
| | | 56 Suspended signs in the historic downtown sign district |
| | Division 3 -- Municipal sign district | || | | 57 Sign design in the municipal sign district |
| | | 58 Agricultural market signs in the municipal sign district |
| | | 59 Awning signs in the municipal sign district |
| | | 60 Canopy signs in the municipal sign district |
| | | 61 Drive through menu board signs in the municipal sign district |
| | | 62 Electronic message board signs in the municipal sign district |
| | | 63 Facade signs in the municipal sign district |
| | | 64 Freestanding signs in the municipal sign district |
| | | 65 Marquee signs in the municipal sign district |
| | | 66 Mural sign in the municipal sign district |
| | | 67 Projecting signs in the municipal sign district |
| | | 68 Service station canopy signs in the municipal sign district |
| | | 69 Suspended signs in the municipal sign district |
| Part 6 -- Sign permits | | |
| | | 70 Permit required |
| | | 71 Application for a permit |
| | | 72 Drawings and specifications |
| | | 73 Refusal of permit |
| | | 74 Expiry of permit |
| | | 75 Cancellation of permit |
| | | 76 Required inspections |
| | | 77 Notice |
| | | 78 Stop work order |
| | | 79 Provincial electrical permit |
| | | 80 Signs on highways |
| Part 7 -- Construction and maintenance | | |
| | | 81 Sign construction |
| | | 82 Electrical wiring |
| | | 83 Sign maintenance |
| | | 84 Removal or copy change |
| | | 85 Signs displaying public information |
| Part 8 -- Compliance | | |
| | | 86 Power of entry |
| | | 87 Sign removal and disposal |
| | | 88 Sign reclamation |
| Part 9 -- Transitional | | |
| | | 89 Repeal |
| | 90 | Consequential Amendments |
The Council of the City of Abbotsford, in open meeting assembled,
enacts as follows:
Part 1 -- Administration
#### Definitions
**1**
In this bylaw:
"agricultural local product sign" means a sign that advertises agricultural products for sale that are produced by a farm operation operating on the
lot where the sign is located;
"agricultural market sign" means a sign that advertises a business or activity where agricultural products are the primary commodity for sale;
"awning" means a fixed or retractable structure,
projecting from a building face, consisting of fabric, sheet metal, or other flexible
material on a frame;
"awning sign" means a sign applied, attached or painted to the surface of an awning that does not project from the surface of the awning;
Figure 1-1: Example of awning sign.
"balloon sign" means a sign or other advertising device inflated by air;
Figure 1-2: Example of balloon sign.
"banner sign" means a sign made of nylon, canvas, vinyl or similar flexible material that is not
adhered to a rigid backing;
Figure 1-3: Example of
banner sign.
"building" means any structure constructed, used or
intended for supporting or sheltering any use or occupancy;
"building face" means all individual wall areas of a
building that face the same direction;
"building frontage zone" means a space within the
front or exterior side setback of a building that does not interfere with pedestrian or vehicular movement;
"building furnishing zone" means the area in front of
a building between the street and pedestrian movement zone that may be used for street furniture, including trees, landscaping, transit stops, or street lights;
"building official" has the same meaning as in the
*Building Bylaw*;
"bylaw enforcement officer" has the same meaning as
in the *Bylaw Enforcement Bylaw*;
"canopy" means a rigid and roofed structure projecting from a building face that is attached to and entirely supported by the building;
"canopy sign" means a sign that is applied, attached or constructed on a canopy;
"changeable copy" means copy that can be changed using detachable letters, characters, numbers or graphics;
"clearance" means the vertical distance between the
lowest point of a sign and grade;
"community activity sign" means a temporary sign that advertises a public event, including a cultural, institutional or recreational event,
farmers' market or charitable campaign;
"construction project sign" means a temporary sign displayed on a construction or development site that advertises the construction or development project taking place, and
may identify the major participants in the project;
Figure 1-4: Example of
construction project sign.
"contractor identification sign" means a temporary sign displayed on a construction or development site that identifies a contractor involved in
the construction or development project, including architects, builders,
developers, engineers or financiers;
"copy" means the letters, characters, symbols,
numbers, or graphics that make up the message on a sign;
"copy area" means the smallest area, measured in square metres, that
encompasses all of the copy on a sign;
Figure 1-5: Example of
copy area.
"directional sign" means a sign indicating the name and direction to a business, place, service or event;
"drive through menu board sign" means a sign that displays information about the food items and beverages sold at a drive through restaurant and
may contain electronic copy;
"electronic copy" means copy that is generated, displayed or changed using electronic screens, computer
video monitors, liquid crystal displays (LCD), light emitting diode (LED)
displays or any other electronic, computer generated or digital
technology;
Figure 1-6: Example of
electronic copy.
"electronic message board sign" means a sign that contains electronic copy but does not include a drive through menu board sign;
"facade sign" means a sign that is applied, attached, inscribed or mounted to a building face that is on a plane parallel to the building face;
Figure 1-7: Example of
facade sign.
"face" means one side of a sign where copy may be placed;
"freestanding sign" means a sign that is self-supporting, separate and independent from a building and permanently anchored to the ground;
"frontage" means the length of a building, lot or premises that abuts or faces a highway, excluding a lane;
"furnishing zone" means the area between a road and
the pedestrian movement zone, where street furniture including benches,
bicycle racks, garbage containers and trees may be located;
"grade" means the average elevation of the finished
ground surface directly below a sign;
"handheld advertising sign" means a sign supported or manipulated by a person that advertises an event, business or promotion of a commercial nature;
"height" means the vertical distance from grade to the uppermost point of a sign;
"highway" means public road allowance, including a
lane, but does not include a private right-of-way on private property;
"home occupation sign" means a sign advertising a permitted home occupation - level 2, home occupation - level 3 or home occupation - level 4
in accordance with the *Zoning Bylaw*;
"identification sign" means a sign that indicates only the name, address and number of a building, organization or person or a business, service or activity conducted in the building;
"illuminated" means the intentional lighting of a
sign by artificial lighting, located on, external to or internal to the sign;
"lot" means land designated as a separate and distinct parcel on a legally recorded subdivision plan or description filed
in the land title office;
"marquee" means a canopy-like structure erected over the entry to a theatre, cinema or similar use, primarily for the purpose of displaying a sign with event details;
"marquee sign" means a sign mounted on a marquee;
Figure 1-8: Example of
marquee sign.
"monument sign" means a freestanding sign
(a) attached to a permanent foundation or mounted on a solid base
greater in length and width than the sign, and
(b) that is not dependent on any pole, post or similar
support;
Figure 1-9: Example of
monument sign.
"mural sign" means a sign created on the exterior of a building as part of a painted mural, intended to advertise a business, project, activity or service;
Figure 1-10: Example of
mural sign.
"owner" includes the owner or tenant who occupies a lot or premises where a sign is located, the person named as the permit holder on a permit and the owner, manufacturer or installer of a sign;
"pedestrian movement zone" means the area of highway intended for pedestrian movement, including a sidewalk, where pedestrians travel and access
destinations along the highway;
"permit" means an authorization issued on a prescribed form by a building official to erect, place, display, alter or move a sign;
"portable sign" means a sign not permanently attached to a building, structure or the ground that can be readily moved from place to place, but does not include a
sandwich board sign;
"poster sign" means a sign made of paper or paper-like materials;
"premises" means a lot, building or portion thereof that is occupied by a single owner or tenant;
"projecting sign" means a sign that is attached to, projects from and entirely supported by a building face;
Figure 1-11: Example of
projecting sign.
"promotional sign" means a temporary sign that promotes the buying or selling of products and services or announces the opening of a new
business;
"provincial electrical permit" means an authorization
from the Province of British Columbia to carry out electrical
work;
"real estate directional sign" means a temporary sign indicating that the premises on which the sign is located is for sale, lease or rent;
"real estate sign" means a temporary sign indicating that the premises on which the sign is located is for sale, lease, or rent;
"roof" means the top enclosure of a building;
"roof-mounted sign" means a sign mounted on the roof of a building;
Figure 1-12: Example of
roof-mounted sign.
"roofline" means the line where the wall of a building intersects with the roof of the building;
"sandwich board sign" means a temporary sign that
(a) consisting of two flat panels attached or hinged at one
end,
(b) is self-supporting, and
(c) is not affixed to the ground, a building or vehicle;
Figure 1-13: Example of
sandwich board sign.
"service station canopy" means a permanent structure
intended to provide lighting and shelter to the pump islands of service
station;
"service station canopy sign" means a sign attached, applied or mounted to the side of a service station canopy;
Figure 1-14: Example of
service station canopy sign.
"sign" means any visual medium used to
(a) attract attention or convey information of any kind by way of
words, numbers, pictures or graphics,
(b) provide direction, information, identification or advertisement,
or
(c) promote a product, business, activity, service or idea;
"sign area" means
(a) the total surface area, measured in square metres, within the
outer edge of the frame or border of a sign, or
(b) where the sign has no frame, border or background, the total area within the shortest perimeter surrounding the
copy;
Figure 1-15: Example of
sign area.
"stake sign" means a sign secured to the ground using one or more stakes;
Figure 1-16: Example of stake sign.
"stop work order" means a notice that directs the
cessation or correction of work performed on a sign;
"suspended sign" means a sign that is suspended from and located entirely under an awning, canopy or similar structure;
Figure 1-17: Example of
suspended sign.
"temporary sign" means a sign that is not permanently attached to a structure or building and is erected for a specified period of time;
"third party advertising" means copy that advertises or directs attention to anything other than an activity,
business, product or service that is conducted, produced or offered on the lot where the sign is located;
Figure 1-18: Example of
third party advertising.
"traffic control device" has the same meaning as in
the *Motor Vehicle Act*;
"vehicle-mounted sign" means a sign attached, applied, mounted or placed on a vehicle or trailer where the
principal purpose of the vehicle or trailer is to serve as a sign or sign support structure;
Figure 1-19: Example of
vehicle-mounted sign.
"window sign" means a sign that is applied, attached or displayed in or on a window but does not
include a window display of products available on the premises;
Figure 1-20: Example of
window sign.
#### Interpretation bylaw
**2**
The *Interpretation Bylaw* applies to this bylaw.
#### Purpose
**3**
The purposes of this bylaw include
(a) supporting local commercial activity through the identification of
businesses and way finding,
(b) ensuring new signs re aligned with the *Official Community Plan*,
(c) encouraging signs that incorporate high standards of design and minimize light
pollution,
(d) regulating signs to ensure and maintain public safety, and
(e) preventing sign proliferation and visual clutter to ensure the effectiveness of signs and enhance the public realm.
#### Figures
**4**
In this bylaw, figures, images and editorial notes
(a) are not part of this bylaw, and
(b) must be considered to have been added editorially for reference only.
Part 2 -- Application
#### Application
**5**
This bylaw applies to all signs within the City, except the following:
(a) notices issued by the government of Canada, government of British
Columbia, a court, the City, or Abbotsford school district;
(b) traffic control devices under the *Motor Vehicle Act*;
(c) signs erected by the City for municipal purposes;
(d) signs erected by the government of British Columbia for highway purposes;
(e) election signs under the *Election Sign Bylaw*;
(f) signs required by law or City bylaw;
(g) the flag of Canada, flag of British Columbia and flags and emblems of civic or non-profit societies, educational, or religious
organizations;
(h) signs attached, applied or mounted to a vehicle if
(i) the vehicle is routinely operated, and
(ii) the sign does not primarily serve as a sign or sign support structure;
(i) signs in the window of a premises that indicate whether the premises is open for business, provided that the sign does not exceed a sign area of 0.2 m²;
(j) signs that indicate the price of gasoline at a service station, provided that the sign is part of a permitted freestanding sign and does not exceed a sign area of 0.6 m²;
(k) signs authorized by the City on property owned or leased by the City, including for third party advertising, on benches or in parks;
(l) signs related to a special event and issued a special event permit issued in accordance with the *Outdoor Special Event, Filming and Activities Bylaw*, and
(i) erected no more than 24 hours before the event, and
(ii) removed no later than 24 hours after the event;
(m) signs depicting danger, hazard, or other safety conditions erected by an individual authorized by a public
agency in the performance of a public duty.
#### Compliance
**6**
A sign must not be erected, placed, displayed, altered or moved unless it complies with the provisions of this bylaw and all
other applicable bylaws.
#### Prohibited signs
**7**
(1) Signs that are not specifically permitted by this bylaw or another City enactment are prohibited.
(2) Without restricting the generality of subsection (1), the following sign types are prohibited:
(a) balloon signs;
(b) handheld advertising signs;
(c) poster signs;
(d) roof-mounted signs;
(e) vehicle-mounted signs.
#### Non-conforming signs
**8** (1) Subject to this section, if, at the time this bylaw is adopted, a
sign to which this bylaw applies is lawfully used and does not conform to this bylaw, the sign may continue as a non-conforming sign and may be maintained and copy altered only to the extent that the repair or alteration would, when completed, involve no further
contravention of this bylaw than that existing at the time the repair or
alteration was started.
(2) Signs referred to in subsection (1) must not be reconstructed or moved except in accordance with this bylaw.
Part 3 -- General Regulations
#### General prohibitions
**9**
Except as otherwise provided in this bylaw, a sign must not
(a) be mounted to a utility pole, fence or tree,
(b) obstruct or interfere with the visibility
(i) of a traffic control device, or
(ii) from one highway to another highway,
(c) obstruct or interfere with the entrance, exit, fire escape, natural lighting, air intake or ventilation of a building,
(d) emit sound or noise,
(e) obstruct or interfere with the flow of pedestrian or vehicle traffic,
(f) swing, move or rotate, or
(g) display flashing, blinking or intermittent lights or
illumination.
#### Signs incorporating multiple sign types
**10**
In the case of a sign that incorporates more than one sign type, the requirements and obligations in this bylaw for each sign type apply to the portion of the sign to which they pertain.
#### Third party advertising
**11**
Except as otherwise provided in this bylaw, a sign must not contain third party advertising.
#### Illuminated signs
**12** (1) Except as otherwise provided in this bylaw, a sign may be illuminated.
(2) Illuminated signs referred to in subsection (1) must
(a) not be illuminated from below, and
(b) if the sign is externally illuminated, be equipped with a shield directing the light downward.
#### Changeable copy
**13**
Except as otherwise provided in this bylaw, a sign may contain changeable copy provided that
(a) the copy area of the changeable copy is not greater than 75% of the sign area, and
(b) each instance of copy change is conducted manually, not automatically.
#### Electronic copy
**14**
Except as otherwise provided in this bylaw, a sign must not contain electronic copy.
Part 4 -- Signs not requiring a permit
#### Signs not requiring a permit
**15**
Except as otherwise provided in this bylaw, signs listed in this Part
(a) do not require a permit, and
(b) are permitted in all sign districts.
#### Compliance with other requirements
**16**
Signs that do not require a permit must comply with all other applicable requirements under this or any City enactment.
#### Address, commemorative or public information signs
**17** A permit is not required for
(a) a sign listing only the building number, address or street name of a premises,
(b) a commemorative plaque or cornerstone, or
(c) a sign providing information or a warning related to safety, security, parking restrictions or public access
and that has a sign area not greater than 0.2 m² per face.
#### Agricultural local product signs
**18** A permit is not required for an agricultural local product sign that
(a) is located outside the City's urban development boundary,
(b) has a combined sign area not exceeding 3 m², and
(c) is no more than 2.5 m in height.
#### Banner signs
**19** A permit is not required for a banner sign that
(a) has a vertical dimension at least twice the width of the banner,
(b) is secured perpendicular to a building face, and
(c) has a combined sign area not exceeding 3 m².
#### Community activity signs
**20**
(1) A permit is not required for a community activity sign that
(a) is limited to four signs for each activity provided that the signs are not located on the same lot frontage,
(b) has a sign area not greater than 3 m² per face,
(c) is erected no more than 45 days prior to the activity,
(d) is removed no more than seven days after the conclusion of the activity, and
(e) is not backlit and internally illuminated.
(2) A community activity sign
may contain third party advertising.
#### Construction project signs
**21**
A permit is not required for a construction project sign that
(a) has a sign area
(i) in the case of a single detached dwelling or duplex, not greater than 0.6 m² per face, or
(ii) in the case of a building other than a single detached dwelling or duplex, not greater than 3 m²
per face, and
(b) is removed
(i) in the case of a subdivision, upon the sale of all of the lots in the subdivision, or
(ii) in the case of a property other than a subdivision, no later than one month following the approved final inspection.
#### Contractor identification signs
**22**
A permit is not required for a contractor identification sign that
(a) has a sign area
(i) in the case of a single detached dwelling or duplex, not greater than 0.2 m² per face, or
(ii) in the case of a building other than a single detached dwelling or duplex, not greater than 1.5 m²
per face, and
(b) is removed no later than 14 days following the approved final inspection of the project.
#### Directional signs
**23**
(1) A permit is not required for a directional sign that
(a) has a sign area not greater than 0.6 m² per face, and
(b) is no more than 1.2 m in height.
(2) A directional sign
may contain third party advertising if the sign
(a) is located outside the City's urban development boundary,
(b) provides directions to a lot in the City where agricultural products are sold that were produced by a farm operation operating on that lot,
(c) is limited to two signs for eachlot to which directions are provided, and
(d) is removed no later than 14 days after products are no longer sold
on the lot to which the directions are provided.
#### Home occupation signs
**24**
A permit is not required for a home occupation sign that
(a) is a freestanding sign,
(b) is limited to one sign on each lot,
(c) is not illuminated, and
(d) has a sign area
(i) in the case of a home occupation - level 2, not greater than 0.4 m² per face, or
(ii) in the case of a home occupation - level 3 or 4, not greater than 1.2 m² per face.
#### Identification signs
**25** A permit is not required for an identification sign that
(a) is limited to one sign for each premises,
(b) has a sign area not greater than 0.6 m² per face,
(c) is not greater than 1.5 m in height, where the sign is freestanding, and
(d) is not internally illuminated.
#### Promotional signs
**26** A permit is not required for a promotional sign that
(a) is limited to one sign for each premises,
(b) is displayed for no more than 90 days in a calendar year,
(c) is not backlit,
(d) is not internally illuminated, and
(e) is any of the following signs:
(i) a banner sign with a sign area not greater than 3 m² per face,
(ii) a portable sign that
(A) has a sign area not greater than 3 m² per face, and
(B) is no more than 1.5 m in height,
(iii) a stake sign that
(A) has a sign area not greater than 0.6 m² per face, and
(B) is no more than 1.5 m in height, or
(iv) a window sign with a sign area not greater than 1.2 m² per face.
#### Real estate directional signs
**27** (1) A permit is not required for a real estate directional sign that
(a) is limited to two signs for each open house event,
(b) has a sign area not greater than 0.6 m² per face,
(c) is no more than 1.2 m in height,
(d) is erected no more than one hour prior to the start of the open house event, and
(e) is removed no more than one hour after the conclusion of the open
house event.
(2) A real estate directional sign
may contain third party advertising.
#### Real estate signs
**28**
A permit is not required for a real estate sign that
(a) is limited to one sign on each frontage of a premises,
(b) has no more than two faces,
(c) has a sign area
(i) in the case of a frontage greater than 100 m in length, not greater than 1.5 m² per face, or
(ii) in the case of a frontage not greater than 100 m in length, not greater than 3 m² per face,
(d) is removed no more than 14 days after the property being advertised is sold, leased or rented,
(e) is not backlit, and
(f) is not internally illuminated.
#### Sandwich board signs
**29** A permit is not required for a sandwich board sign that
(a) is limited to one sign for each premises,
(b) is located in
(i) the building frontage zone, or
(ii) the building furnishing zone in which a clear pedestrian movement zone is maintained,
(c) has a sign area not greater than 0.6 m² per face, and
(d) is removed when the premises are not open for business.
#### Window signs
**30** A permit is not required for a window sign that has a sign area not greater than 25% of the total area of the window on which the sign is located.
Part 5 -- Sign districts
#### Sign districts
**31**
(1) For the purpose of this bylaw, the City is divided into the following 3 sign districts as illustrated in Figure 5-1:
(a) mixed use centre sign district;
(b) historic downtown sign district;
(c) municipal sign district.
Figure 5-1: Sign district map
**Figure 5-1** provides a general illustration of the City's sign districts. For the precise definition of each sign district, refer to subsection (2) below. For convenience, the City's Web Map may be used to identify the land use designation or Neighbourhood Plan that applies to a property.
(2) For ease of reference, the City's sign districts are further illustrated within inset maps according to Figure 5-2.
Figure 5-2: Sign district inset map
(3) The following inset maps generally illustrate the City's sign districts:
(a) inset 1 as shown in Figure 5-3;
Figure 5-3: Inset
1
(b) inset 2 as shown in Figure 5-4;
Figure 5-4: Inset
2
(c) inset 3 as shown in Figure 5-5;
Figure 5-5: Inset
3
(d) inset 4 as shown in Figure 5-6;
Figure 5-6: Inset
4
(e) inset 5 as shown in Figure 5-7;
Figure 5-7: Inset
5
(f) inset 6 as shown in Figure 5-8;
Figure 5-8: Inset
6
(g) inset 7 as shown in Figure 5-9.
Figure 5-9: Inset
7
#### Sign district locations
**32**
(1) The mixed use centres sign district includes all lands
(a) designated urban centre, neighbourhood centre or institutional
complex, and
(b) subject to the City Centre Neighbourhood Plan or UDistrict
Neighbourhood Plan
in the *Official Community Plan Bylaw*.
(2) The historic sign district includes all lands subject to the Historic Downtown Neighbourhood Plan in the *Official Community Plan Bylaw*.
(3) The municipal sign district includes all lands not included in the mixed use centres sign district or the historic downtown sign district.
Division 1 -- Mixed use centres sign district
#### Sign design in the mixed use centres sign district
**33**
Signs located in the mixed use centres sign district are encouraged to be directly integrated into building facades and architecturally consistent with associated buildings.
Figure 5-1-1: Example of
Signs in the Mixed Use Centres Sign District
#### Sign materials in the mixed use centres sign district
**34**
(1) Signs located in the mixed use centres sign district must be composed of contemporary, durable materials, including but not limited to the
following:
(a) aluminium;
(b) aluminium composite material;
(c) fabric;
(d) finished concrete;
(e) polycarbonate;
(f) treated wood.
(2) Signs located in the mixed use centres sign district must not be predominantly composed of temporary, unfinished materials, including the following:
(a) coroplast;
(b) particleboard;
(c) untreated wood or plywood.
#### Awning signs in the mixed use centres sign district
**35**
An awning sign located in the mixed use centres sign district must
(a) be located on the first storey of a building,
(b) have a sign area not greater than 1 m² per linear metre of the length of the awning, provided that the combined sign area of all signs on the building face not greater than 1 m² per linear metre of the length of the building face,
(c) have a copy area not greater than 50% of the exterior surface area of the awning;
(d) have a clearance of at least 2.5 m,
(e) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(f) not be backlit or internally illuminated.
#### Canopy signs in the mixed use centres sign district
**36**
A canopy sign located in the mixed use centres sign district must
(a) be located on the first storey of a building,
(b) have a sign area not greater than 1 m² per linear metre of length of the canopy, provided that the combined sign area of all signs on the building face not greater than 1 m² per linear metre of the length of the building face,
(c) if the sign has a frame, border or background, have a copy area not greater than 50% of the sign area,
(d) have a clearance of at least 2.5 m,
(e) not project further than 0.3 m from the side of the canopy,
(f) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(g) if backlit or internally illuminated, have only the copy of the sign illuminated.
#### Drive through menu board signs in the mixed use centres sign district
**37**
A drive through menu board sign located in the mixed use centres
sign district must
(a) be limited to 2 signs per drive through aisle,
(b) be located at the entrance to or side of and facing a drive
through aisle,
(c) have a sign area not greater than 3.0 m² per face, and
(d) be no more than 2 m in height.
#### Electronic message board signs in the mixed use centres sign district
**38**
An electronic message board sign located in the mixed use centres sign district must
(a) be limited to 1 sign for each premises,
(b) be a canopy sign, facade sign, freestanding sign or marquee sign,
(c) in the case of a canopy sign or a marquee sign,
(i) be located on the first storey of the building,
(ii) have a sign area not greater than 1 m² per linear metre of the
length of the canopy or marquee, to a maximum of 5 m² per sign, provided that the combined sign area of all sign on the building face is not greater than 1 m² per linear metre of the length of the building face,
(iii) not project further than 1 m above the canopy or 0.3 m from the side of the canopy or marquee,
(iv) have a clearance of at least 2.5 m, and
(v) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign,
(d) in the case of a facade sign,
(i) have a sign area of not greater than 1 m² per linear metre of the
length of the building face, to a maximum of 5.0 m² per sign, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(ii) not project further than 0.3 m from the building face,
(iii) have a clearance of at least 2.5 m, and
(iv) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign,
(e) in the case of a freestanding sign,
(i) be a monument sign,
(ii) be at least 50 m from any other freestanding sign on the same lot,
(iii) have a sign area not greater than 3 m² per face,
(iv) be no more than 3 m in height, and
(v) have a base no more than 1 m in height,
(f) be at least 15 m from a traffic control signal,
(g) be at least 30 m from a dwelling unit facing the copy of the sign,
(h) be deactivated
(i) when the business being advertised is not open for business, or
(ii) between the hours of 10:00 pm and 7:00 am
where the sign is within 60 m of a dwelling unit facing the copy area of the sign,
(i) not change copy more frequently than once per 10 seconds,
(j) not include special effects or transitions, including scrolling,
flashing, animation or moving text and pictures,
(k) be equipped with an ambient light sensor that automatically
adjusts the luminance of the sign,
(l) not increase the level of ambient light on an adjacent highway or lot by more than 3 lux, and
(m) default to a black screen when the sign malfunctions.
#### Facade signs in the mixed use centres sign district
**39**
(1) A facade sign located in the mixed use centres sign district must
(a) have a sign area not greater than 1 m² per linear metre of the
length of the building face, provided that the combined sign area of all signs on the building face are not greater than 1 m² per linear metre of the length of the building face,
(b) if the sign has a frame, border or background, have a copy area not greater than 50% of the sign area,
(c) if the sign projects further than 15 cm from the building face, have a clearance of at least 2.5 m,
(d) not project further than 30 cm from the building face,
(e) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(f) if backlit or internally illuminated, have only the copy of the sign illuminated.
(2) A facade sign located in the mixed use centres sign district may contain third party advertising if the sign
(a) is located within a multiple lot commercial or industrial development, including but not limited to a business, park or shopping complex, and
(b) advertises a business located within the same development.
#### Freestanding signs in the mixed use centres sign district
**40**
(1) A freestanding sign located in the mixed use centres sign district must
(a) be a monument sign,
(b) be limited to 1 sign for every 50 m of a frontage,
(c) not be within 50 m of another freestanding sign on the same lot,
(d) have a sign area no greater than 3 m² per face,
(e) have a copy area no greater than 50% of the sign area per face,
(f) be no more than 3 m in height,
(g) have a base not greater than 1 m in height, and
(h) if backlit or illuminated, have only the copy of the sign illuminated.
(2) A freestanding sign located in the mixed use centres sign district may contain third party advertising if the sign
(a) is located within a multiple lot commercial or industrial development, including but not limited to a business, park or shopping complex, and
(b) advertises a business located within the same development
#### Marquee signs in the mixed use centres sign district
**41**
A marquee sign located in the mixed use centres sign district must
(a) be located on the first storey of a building,
(b) have a sign area not greater than 1 m² per linear metre of the length of the marquee, provided that the combined sign area of all sign on the building face not greater than 1 m² per linear metre of the length of the building face,
(c) if the sign has a frame, border or background, have a copy area not greater than 50% of the sign area,
(d) have a clearance of at least 2.5 m,
(e) not project further than 0.3 m from the side of the marquee, and
(f) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign.
#### Mural signs in the mixed use centres sign district
**42**
A mural sign located in the mixed use centres sign district must
(a) be limited to 1 sign on each building face of a premises,
(b) be consistent with the City's Public Art Policy,
(c) be applied at the same time as the mural, using the same method of application and the same type and quality of materials as the
mural,
(d) if the mural is removed, be removed with the mural,
(e) have a sign area not greater than 10% of the total area of the mural, and
(f) not be backlit or internally illuminated.
#### Projecting signs in the mixed use centres sign district
**43**
A projecting sign located in the mixed use centres sign district must
(a) be limited to 1 sign on each building face of a premises,
(b) be perpendicular to the building face, except that on a corner lot, the sign may be on an angle at the corner of the building,
(c) have copy on 2 faces,
(d) have a sign area not greater than 7.5 m² per face, provided that the combined sign area of all signs on the building face are not greater than 1 m² per linear metre of the length of the building face,
(e) have a copy area not greater than 50% of the sign area per face,
(f) have a clearance of at least 2.5 m,
(g) have a distance not greater than 0.3 m between the sign and the building face,
(h) not project further than 1.5 m from the building face,
(i) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(j) if backlit or internally illuminated, have only the copy of the sign illuminated.
#### Service station canopy signs in the mixed use centres sign district
**44**
A service station canopy sign located in the mixed use centres sign district must
(a) be limited to 1 sign per side of a service station canopy,
(b) have a vertical dimension not greater than 2 m,
(c) have a horizontal dimension not greater than 20% of the length of
the side of the service station canopy,
(d) have no copy other than the name and logo of the service station, and
(e) not project further than 0.6 m from the service station canopy.
#### Suspended signs in the mixed use centres sign district
**45**
A suspended sign located in the mixed use centres sign district must
(a) be limited to 1 sign on each building face of a premises,
(b) be perpendicular to the building face, except that on a corner lot, the sign may be on an angle at the corner of the building,
(c) have copy on 2 faces,
(d) have a sign area not greater than 0.5 m² per face, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(e) have a clearance of at least 2.5 m,
(f) have a distance not greater than 0.3 m between the sign and the building face,
(g) not project further than 1.5 m from the building face,
(h) not extend beyond the awning, canopy or similar feature under which the sign is suspended, and
(i) if backlit or internally illuminated, have only the copy of the sign illuminated.
Division 2 -- Historic downtown sign district
#### Sign design in the historic downtown sign district
**46**
Signs located in the historic downtown sign district are encouraged to be directly integrated into building facades and architecturally consistent with associated buildings.
Figure 5-2-1: Example of
Signs in the Historic Downtown Sign District
#### Sign colours in the historic downtown sign district
**47**
(1) Sign colours in the historic downtown sign district must reflect the historic character and visual style of the district.
(2) Sign colours in the historic downtown sign district may be drawn from the following palettes:
(a) Vancouver heritage foundation true colours palette;
(b) Benjamin Moore historical collections;
(c) Sherwin Williams historic collection.
#### Sign materials in the historic downtown sign district
**48**
(1) Signs located in the historic downtown sign division must be composed of durable, traditional materials, including but not limited to
(a) cast iron,
(b) gilding,
(c) goldleaf,
(d) paint,
(e) porcelain enamel, and
(f) treated wood.
(2) Signs located in the historic downtown sign division may not be predominantly composed of temporary, unfinished materials, including but not limited to
(a) coroplast,
(b) particleboard,
(c) untreated wood, and
(d) untreated plywood.
#### Awning signs in the historic downtown sign district
**49**
(1) An awning sign located in the historic downtown sign district
must
(a) be located on the first storey of a building,
(b) have a sign area not greater than 1 m² per linear length of the
awning, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(c) have a copy area not greater than 50% of the exterior surface area
of the awning,
(d) have a clearance of at least 2.5 m,
(e) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(f) not be backlit or internally illuminated.
(2) When an awning sign is applied to an awning, the awning may not include vinyl or translucent fabrics or feature quarter roll, bubble, domed or curved
shapes.
#### Canopy signs in the historic downtown sign district
**50**
A canopy sign located in the historic downtown sign district must
(a) be located on the first storey of a building,
(b) have a sign area not greater than 1 m² per linear metre of the length of the canopy, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(c) if the sign has a frame, border or background, have a copy area not greater than 50% of the sign area,
(d) have a clearance of at least 2.5 m,
(e) not project further than 0.3 m from the side of the canopy,
(f) not extend above any roofline, balulstrade, guardrail or windowsill immediately above the sign, and
(g) not be backlit or internally illuminated.
#### Facade signs in the historic downtown sign district
**51**
(1) A facade sign located in the historic downtown sign district must
(a) have a sign area not greater than 1 m² per linear metre of the
length of the building face, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(b) if the sign has a frame, border or background, have a canopy area not greater than 50% of the sign area,
(c) if the sign projects further than 15 cm from the building face, have a clearance of at least 2.5 m,
(d) not project further than 30 cm from the building face,
(e) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(f) not be backlit or internally illuminated.
(2) A facade sign located in the historic downtown sign district may contain third party advertising if the sign
(a) is located within a multiple lot commercial or industrial development, including but not limited to a business, park or shopping complex, and
(b) advertises a business located within the same development.
#### Freestanding signs in the historic downtown sign district
**52**
(1) A freestanding sign located in the historic downtown sign district must
(a) be a monument sign,
(b) be limited to 1 sign for every 50 m of a frontage,
(c) not be within 50 m of another freestanding sign on the same lot,
(d) have a sign area not greater than 3 m² per face,
(e) have a copy area not greater than 50% of the sign area per face,
(f) be no more than 3 m in height,
(g) have a base not greater than 1 m in height, and
(h) not be backlit or internally illuminated.
(2) A freestanding sign located in the historic downtown sign district may contain third party advertising if the sign
(a) is located within a multiple lot commercial or industrial development, including but not limited to a business, park or shopping complex, and
(b) advertises a business located within the same development
#### Marquee signs in the historic downtown sign district
**53**
A marquee sign located in the historic downtown sign district must
(a) be located on the first storey of a building,
(b) have a sign area not greater than 1 m² per linear metre of the length of the marquee, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(c) if the sign has a frame, border or background, have a copy area not greater than 50% of the sign area,
(d) have a clearance of at least 2.5 m,
(e) not project further than 0.3 m from the side of the marquee, and
(f) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign.
#### Projecting signs in the historic downtown sign district
**54**
A projecting sign located in the historic downtown sign district must
(a) be limited to 1 sign on each building face of a premises,
(b) be perpendicular to the building face, except that on a corner lot, the sign may be on an angle at the corner of the building,
(c) have copy on 2 faces,
(d) have a sign area not greater than 3 m² per face, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(e) have a copy area not greater than 50% of the sign area per face,
(f) have a clearance of at least 2.5 m,
(g) have a distance not greater than 0.3 m between the sign and building face,
(h) not project further than 1.5 m from the building face,
(i) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign,
(j) not be backlit or internally illuminated.
#### Service station canopy signs in the historic downtown sign district
**55**
A service station canopy sign located in the historic downtown sign district must
(a) be limited to 1 sign per side of a service station canopy,
(b) have a vertical dimension not greater than 2 m,
(c) have a horizontal dimension not greater than 20% of the length of
the side of the service station canopy,
(d) have no copy other than the name and logo of the service station,
(e) not project further than 0.6 m from the service station canopy, and
(f) not be backlit or internally illuminated.
#### Suspended signs in the historic downtown sign district
**56**
A suspended sign located in the historic downtown sign district must
(a) be limited to 1 sign on each building face of a premises,
(b) be perpendicular to the building face, except that on a corner lot, the sign may be on an angle at the corner of the building,
(c) have copy on 2 faces,
(d) have a sign area not greater than 0.5 m² per face provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(e) have a clearance of at least 2.5 m,
(f) have a distance not greater than 0.3 m between the sign and building face,
(g) not project further than 1.5 m from the building face,
(h) not extend beyond the awning, canopy or similar feature under which the sign is suspended, and
(i) not be backlit or internally illuminated.
Division 3 -- Municipal sign district
#### Sign design in the municipal sign district
**57** Signs located in the municipal sign district are encouraged to be integrated into building facades and architecturally consistent with associated buildings.
#### Agricultural market signs in the municipal sign district
**58**
(1) An agricultural market sign located in the municipal sign district must
(a) be located outside the City's urban development boundary,
(b) advertise a business in the City that is located no more than 200 m from the Trans-Canada Highway or British Columbia Highway
11,
(c) be limited to 1 sign of each business being advised for each direction of highway travel,
(d) not be located within 1 km of an entrance or exit from the
Trans-Canada Highway,
(e) have a sign area not greater than 3 m per face, and
(f) be not greater than 5 m in height.
(2) An agricultural market sign located in the municipal sign district may contain third party advertising.
#### Awning signs in the municipal sign district
**59**
An awning sign located in the municipal sign district must
(a) be located on the first storey of a building;
(b) have a sign area not greater than 1 m² per linear metre of the length of the awning, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face;
(c) have a copy area not greater than 50% of the exterior surface area of the awning;
(d) have a clearance of at least 2.5 m;
(e) not extend above any roofline, balustrade, guardrail, or windowsill immediately above the sign, and
(f) not be backlit or internally illuminated.
#### Canopy signs in the municipal sign district
**60** A canopy sign located in the municipal sign district must
(a) be located on the first storey of a building,
(b) have a sign area not greater than 1 m² per linear metre of the length of the canopy, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(c) if the sign has a frame, border or background, have a copy area not greater than 50% of the sign area,
(d) have a clearance of at least 2.5 m,
(e) not project further than 0.3 m from the side of the canopy,
(f) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(g) if backlit or internally illuminated, have only the copy of the sign illuminated.
#### Drive through menu board signs in the municipal sign district
**61**
A drive through menu board sign located in the municipal sign district must
(a) be limited to 2 signs per drive through aisle,
(b) be located at the entrance or to the side of and facing a drive
through aisle,
(c) have a sign area not greater than 3 m² per face, and
(d) be no more than 2 m in height.
#### Electronic message board signs in the municipal sign district
**62**
An electronic message board sign located in the municipal sign district must
(a) be limited to 1 sign for each premises,
(b) be a canopy sign, facade sign, freestanding sign or marquee sign,
(c) in the case of a canopy sign or marquee sign,
(i) be located on the first storey of the building,
(ii) have a sign area not greater than 1 m² per linear metre of the
length of the canopy or marquee, to a maximum of 5 m², provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(iii) not project further than 1 m above the canopy or 0.3 m from the side of the canopy or marquee;
(iv) have a clearance of at least 2.5 m, and
(v) not extend above any roofline, balustrade, guardrail, or windowsill immediately above the sign,
(d) in the case of a facade sign,
(i) have a sign area not greater than 1 m² per linear metre of the
length of the building face to a maximum of 10 m², provided that the combined
sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(ii) does not project further than 0.3 m from the building face,
(iii) have a clearance of at least 2.5 m, and
(iv) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign,
(e) in the case of a freestanding sign
(i) be at least 50 m from any other freestanding sign on the same lot,
(ii) have a sign area not greater than 5 m² per face, and
(iii) be no more than 6 m in height with a base no more than 1 m in height,
(f) be at least 15 m from a traffic control signal,
(g) be at least 30 m from a dwelling unit facing the copy of the sign,
(h) be deactivated when the business being advertised is not open, or otherwise between the hours of 10:00 pm and 7:00 am, where the
sign is within 60 m of a dwelling unit facing the copy area of the sign;
(i) not change copy more frequently than once per 10 seconds,
(j) not include special effects or transitions, including but not
limited to scrolling, flashing, animation or moving text and
pictures,
(k) be equipped with an ambient light sensor that automatically
adjusts the luminance of the sign,
(l) not increase the level of ambient light on an adjacent highway or lot by more than 3 lux, and
(m) default to a black screen when the sign malfunctions.
#### Facade signs in the municipal sign district
**63** (1) A facade sign located in the municipal sign district must
(a) have a sign area not greater than 1 m² per linear metre of the
length of the building face, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(b) if the sign has a frame, border or background, have a copy area not greater than 50% of the sign area,
(c) if the sign projects further than 15cm from the building face, have a clearance of at least 2.5 m,
(d) not project further than 30 cm from the building face,
(e) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(f) if backlit or internally illuminated, have only the copy of the sign illuminated.
(2) A facade sign located in the municipal sign district may contain third party advertising if the sign
(a) is located within a multiple lot commercial or industrial development, including but not limited to a business, park or shopping complex, and
(b) advertises a business located within the same development.
#### Freestanding signs in the municipal sign district
**64**
(1) A freestanding sign located in the municipal sign district must
(a) be limited to 1 sign for every 50 m of a frontage,
(b) not be within 50 m of another freestanding sign on the same lot,
(c) have a sign area not greater than 7.5 m² per face,
(d) have a copy area not greater than 50% of the sign area per face,
(e) be no more than 6 m in height,
(f) have a base not greater than 1 m in height, and
(g) if backlit or internally illuminated, have only the copy of the sign illuminated.
(2) A freestanding sign located in the municipal sign district may contain third party advertising if the sign
(a) is located within a multiple lot commercial or industrial development, including but not limited to a business, park or shopping complex, and
(b) advertises a business located within the same development
#### Marquee signs in the municipal sign district
**65**
A marquee sign located in the municipal sign district must
(a) be located on the first storey of a building,
(b) have a sign area not greater than 1 m² per linear metre of the length of the marquee, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(c) if the sign has a frame, border or background, have a copy area not greater than 50% of the sign area,
(d) have a clearance of at least 2.5 m,
(e) not project further than 0.3 m from the side of the marquee, and
(f) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign.
#### Mural sign in the municipal sign district
**66** (1) A mural sign located in the municipal sign district must
(a) be limited to 1 sign on each building face of a premises,
(b) be consistent with the City's Public Art Policy,
(c) if the mural is removed, be removed with the mural,
(d) have a sign area not greater than 10% of the total area of the
mural, and
(e) not be backlit or internally illuminated.
(2) A mural sign located in the municipal sign district may include
(a) the date of installation of the mural,
(b) the name of the building, and
(c) the name of the logo of the principal occupant of the premises.
#### Projecting signs in the municipal sign district
**67**
A projecting sign located in the municipal sign district must
(a) be limited to 1 sign on each building face of a premises,
(b) be perpendicular to the building face, except that on a corner lot, the sign may be on an angle at the corner of the building,
(c) have copy on 2 faces,
(d) have a sign area not greater than 7.5 m² per face, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(e) have a copy area not greater than 50% of the sign area per face,
(f) have a clearance of at least 2.5 m,
(g) have a distance not greater than 0.3 m between the sign and building face, and
(h) not project further than 2 m from the building face,
(i) not extend above any roofline, balustrade, guardrail or windowsill immediately above the sign, and
(j) if backlit or internally illuminated, only the copy of the sign is illuminated.
#### Service station canopy signs in the municipal sign district
**68**
A service station canopy sign located in the municipal sign district must
(a) be limited to 1 sign per side of a service station canopy,
(b) have a vertical dimension not greater than 2 m,
(c) have a horizontal dimension not greater than 20% of the length of
the side of the service station canopy,
(d) have no copy other than the name and logo of the service station, and
(e) not project further than 0.6 m from the limits of the service station canopy.
#### Suspended signs in the municipal sign district
**69**
A suspended sign located in the municipal sign district must
(a) be limited to 1 sign on each building face of a premises,
(b) be perpendicular to the building face, except that on a corner lot, the sign may be on an angle at the corner of the building,
(c) have copy on 2 faces,
(d) have a sign area not greater than 0.5 m per face, provided that the combined sign area of all signs on the building face is not greater than 1 m² per linear metre of the length of the building face,
(e) have a clearance of at least 2.5 m,
(f) have a distance not greater than 0.3 m between the sign and building face,
(g) not project further than 1.5 m from the building face,
(h) not extend beyond the awning, canopy or similar feature under which the sign is suspended, and
(i) if backlit or internally illuminated, only the copy of the sign is illuminated.
Part 6 -- Sign permits
#### Permit required
**70**
Except sign listed in Part 4 Signs not requiring a permit, a permit is required
(a) to erect any sign, and
(b) to change the copy of a sign where the change of copy alters the attachments, structure or supports of the sign.
#### Application for a permit
**71** A person who wishes to obtain a permit must submit a complete permit application including the following information:
(a) legal description and civic address of the property where the sign is proposed;
(b) authorization from the owner of the lot where the sign is proposed;
(c) the valid City or intermunicipal business licence number of the owner or occupant of the premises and any contractor identified in the application;
(d) detailed scale drawings demonstrating the following, as
applicable:
(i) dimensions of the sign and supporting structure, including sign area, copy area, height, clearance and projection;
(ii) location of the sign and dimensions of the building face, lot and any other proposed or existing signs within the lot or on the building face;
(iii) proposed copy of the sign;
(iv) colour and material specifications of the sign;
(v) illumination of the sign;
(vi) structural and footing details;
(e) value of construction;
(f) the requisite application fee for the proposed sign, in accordance with the *Fees and Charges Bylaw*;
(g) any further technical information required by the building official under section 72 drawings and specifications or any other applicable
bylaw.
#### Drawings and specifications
**72**
(1) Despite section 71 application for a permit, the building official may require a permit applicant to provide additional technical information, including the following:
(a) complete drawings and specifications related to construction of
the sign;
(b) documentation confirming that the building on which the sign is erected is capable of supporting additional structural loads imposed by the erection of the sign;
(c) reports, opinions, designs, sealed drawings and letters of assurance related to the sign and prepared by a registered professional
engineer or other registered professional;
(d) technical data of a combustible plastic material from the
manufacturer or from an acceptable testing agency;
(e) results of fire tests of combustible plastic material from an
approved testing agency.
#### Refusal of permit
**73**
The building official
may refuse to process an application for or issue a permit referred to in section 71 application for a permit if
(a) application or supporting documents
(i) are incomplete,
(ii) do not comply with the provisions of this bylaw, or
(iii) contain false or incorrect information,
(b) the proposed sign is not permitted by this bylaw or by another enactment,
(c) in the opinion of the building official,
(i) the building on which the sign is to be located is not structurally capable of supporting the proposed sign, or
(ii) the information submitted regarding the building is not sufficient to enable the building official to determine the structural capacity of the
building, or
(d) in the opinion of the director, transportation, or their designate, the sign may interfere with or otherwise obstruct a traffic control device, or interfere with the visibility from one
highway to another.
#### Expiry of permit
**74** A permit is expired if, in the opinion of the building official, an owner has failed to commence the work authorized by the permit within 6 months of the date of issuance of the permit.
#### Cancellation of permit
**75** An applicant may request to cancel a permit before its expiry if, in the opinion of the building official, no work authorized by the permit has commenced.
#### Required inspections
**76**
Where a permit is required,
(a) all signs constructed, erected, installed or altered under this bylaw are subject to a final inspection,
and
(b) all freestanding signs are subject to a footing and form inspection.
#### Notice
**77**
A person may request a sign inspection under this bylaw by providing the building official with at least 24 hours' notice of the requested inspection time.
#### Stop work order
**78**
(1) The building official
may issue a stop work order.
(2) A person must not do any work, or continue to do any work, contrary to the stop work order referred to in subsection (1).
(3) Except with express permission of the building official, a person must not alter, deface, cover, reverse, remove or in any way tamper with a stop work order placed on or attached to any premises.
#### Provincial electrical permit
**79** (1) Where a sign is connected to an electrical energy source, the sign must have a provincial electrical permit.
(2) A provincial electrical permit holder must produce the provincial electrical permit upon request by the City.
#### Signs on highways
**80** A sign must not be located on or over a highway, except where a highway use permit is issued pursuant to the *Street and Traffic Bylaw*.
Part 7 -- Construction and maintenance
#### Sign construction
**81**
Signs and sign structures must be designed and constructed in accordance with the requirements of the *Building Code*, this bylaw and all other applicable bylaws and regulations.
#### Electrical wiring
**82**
If a sign requires electrical wiring, the electrical wiring must be approved by the Canadian Standards Association or a provincial electrical
inspector.
#### Sign maintenance
**83**
The owner of a sign must maintain the sign in good repair and safe condition free from defects in accordance with this bylaw.
#### Removal or copy change
**84**
The owner of a premises must remove or change the copy of a sign that
(a) identifies a business no longer operating on the premises, within 90 calendar days of the business not operating on the premises, or
(b) advertises, promotes or directs attention to goods, services or activities that are no longer available on the premises within 90 calendar days of the goods, services or activities being unavailable on the premises.
#### Signs displaying public information
**85** (1) In this section, public information includes the calendar date,
temperature, time or weather forecast.
(2) Where a sign displays public information, the information must be current for the City.
Part 8 -- Compliance
Every person who contravenes this bylaw commits an offence and is subject to enforcement and penalties in accordance with the Bylaw
Enforcement Bylaw.
#### Power of entry
**86**
The building official or bylaw enforcement officer
may enter any building or premises at any reasonable time for the purpose of administering or enforcing this
bylaw.
#### Sign removal and disposal
**87**
(1) Where the bylaw enforcement officer has reasonable and probable grounds to
believe a sign is in contravention of this bylaw, the bylaw and enforcement officer may remove the sign without notice.
(2) If a sign is not reclaimed in accordance with section 88 sign reclamation, the City may dispose of the sign without notice or compensation.
#### Sign reclamation
**88**
(1) If a sign is removed in accordance with section 87 sign removal and disposal, the owner may reclaim the sign within 14 days of removal.
(2) To reclaim a sign under subsection (1), the owner of the sign must pay a $50.00 administrative fee to the City.
Part 9 -- Transitional
#### Repeal
**89**
*Sign Bylaw, 2001* is repealed.
**Consequential Amendments**
**90** Section 8 Sign Permit Fees of Schedule "G"
Building of the *Fees and Charges Bylaw* is repealed and the following substituted:
#### Sign permit fees
**8**
(a) Installation of all new signs: $105.00
(b) Temporary sign
permit: $40.00
READ A FIRST TIME on
July
10,
2023
READ A SECOND TIME on
July
10,
2023
READ A THIRD TIME on
July
10,
2023
ADOPTED on
July
24,
2023
###