| permit required | yes | Where permitted, tree removal shall require a development permit |
| applies to private property | yes | The provisions of this Bylaw apply to all land and buildings |
| protected threshold | evergreen and birch trees | removal of evergreen and birch trees shall not be allowed |
| replacement required | Where mature trees are removed from a lot, they shall be replaced with new trees on the following basis: a. Where an existing deciduous tree has a caliper between 100.0 mm and 200.0 mm, one (1) new tree shall be required; b. Where an existing deciduous tree has a caliper greater than or equal to 200.0 mm, two (2) new trees shall be required; c. Where an existing coniferous tree has a height between 4.0 m and 7.0 m, one (1) new tree shall be required; and d. Where an existing coniferous tree has a height greater than or equal to 7.0 m, two (2) new trees shall be required. | they shall be replaced with new trees |
| boulevard trees | Tree removal shall be discouraged within 6.0 m of the road right of way. | TREE REMOVAL |
scout note
Land Use Bylaw bars removing any evergreen or birch tree Village-wide under a standing caveat; other tree removal needs a development permit and, once mature trees are cleared, replacement at a 1-for-1 or 2-for-1 ratio by caliper/height, discouraged within 6m of a waterbody or road right-of-way.