Sewer Regulation Bylaw No. 980, 2011 (consolidated Dec 2025)
Harrison Hot Springs, British Columbia
· No. 980
· adopted 2011-07-11
· summary & facts
This is the exact embedded text of the captured official document.
Snapshot 2364d94f393c · verified 2026-10-18 ·
original document ·
archived snapshot ·
unofficial consolidation, the official version is held by the municipal clerk.
December-1%2C-2025%29.pdf"
municipality_ids:
- gx-000048
content_type: "application/pdf"
captured_at: "2026-10-15T04:50:23+00:00"
normalize_method: "pdf-pymupdf"
normalize_version: "0.2"
needs_ocr: false
char_count: 42300
---
SEWER REGULATION BYLAW NO. 980, 2011
(CONSOLIDATED)
Consolidated to: December 1, 2025
THIS DOCUMENT HAS BEEN REPRODUCED FOR CONVENIENCE ONLY with the following
amending bylaws. Individual copies of this bylaw and any of the below bylaws are available at
the Village Office. For legal purposes, copies of the original bylaws should be obtained.
Record of Amendments to Sewer Regulation Bylaw
Amending
Bylaw No.
Type of Amendment
Summary of Amendment
Date of Adoption
Text
Schedule
985
X
X
Schedule "A" be amended to read Schedule "B"
Prohibited Waste, Restricted Waste, and
Specified Waste
Schedule "B" be amended to read Schedule "C"
Restricted Waters - Sanitary Sewer Discharges
September 19,
2011
1000
X
X
Read: "Village of Harrison Hot Springs Sewer
Regulation and Fee Bylaw No. 980, 2011"
Schedule "A" in its entirety
April 16, 2012
1032
X
Schedule "A" in its entirety
April 15, 2013
1051
X
Schedule "A" in its entirety
April 7, 2014
1091
X
Schedule "A" in its entirety
October 17, 2016
1133
X
Schedule "A" in its entirety
February 4, 2019
1197
X
Schedule "A" in its entirety
February 20, 2024
1233
X
Schedule "A" in its entirety
December 1, 2025
CONSOLIDATED TO: DECEMBER 1, 2025
VILLAGE OF HARRISON HOT SPRINGS
BYLAW NO. 980
A bylaw for the regulation of sewer services
WHEREAS the Village of Harrison Hot Springs has deemed it advisable to establish a
bylaw to regulate the connections to the Community Sewers;
NOW THEREFORE in open meeting assembled, the Mayor and Council of the Village
of Harrison Hot Springs enacts as follows:
CITATION
1.
This Bylaw may be cited for all purposes as the Village of Harrison Hot Springs
"Sewer Regulation and Fee Bylaw No. 980, 2011". (AB #1000)
INTERPRETATION/DEFINITION
2.
In this Bylaw unless the context otherwise requires:
"Biosolids" means a primarily organic solid left over from a wastewater treatment
process that can be beneficially recycled.
"BOD" (Biochemical Oxygen Demand) means the quantity of oxygen expressed in
milligrams per liter utilized in the biochemical oxidation of organic matter under
standard laboratory procedure according to standard methods.
"Building Sewer" shall mean the sewer pipe extending from the property line of
the property concerned or the Community Sewer where this is located in an
easement through the property, to the building situated thereon, and joining the
plumbing system of the building.
"Community Sewer" shall mean any sewer, sewer system or portion thereof used
or intended to be used for public use and under the control of the Village. It does
not include any portion of a sewer system on private lands.
"Construction Dewatering" means the act of pumping groundwater or storm water
away from an active construction site.
"Council" shall mean the Council of the Village.
"Engineer" means a Professional Engineer registered in the Province of British
Columbia, appointed by Council to act as the Village's Engineer or his designate
2
CONSOLIDATED TO: DECEMBER 1, 2025
and is appointed by the Chief Administrative Officer or such other person as the
Village may from time to time appoint.
"Hazardous Substance" means:
(a)
any substance or mixture of substances other than a pesticide that exhibits
characteristics of inflammability, corrositivity, reactivity or toxicity;
(b)
any substance that is designed as a hazardous substance within the
meaning of the Federal and Provincial regulations.
"Indirect Discharge" means the act of introducing or depositing wastes from any
non-domestic source into a public sewer, private sewer, or side sewer tributary to
the Sewer System.
"Inspector" shall mean the Inspector of the Village or such other person as the
Chief Administrative Officer may from time to time appoint.
"Inspection Chamber" means a clean-out installed at the property line of a
building which connects the Building Sewer to the Sewer Connection. The
Inspection Chamber shall be installed in accordance to MMCD Drawing No. S9.
"Operations Manager" shall mean the Operations Manager of the Village or such
other person as the CAO may from time to time appoint.
"Owner" shall mean the person or persons including a corporation or company,
registered in the records of the Land Title Office as Owner in fee simple of real
property, and includes authorized agents.
"pH" means the logarithm of the reciprocal of the weight of hydrogen ions in
grams per liters of solution. Neutral water, for example, has a pH of 7 and
hydrogen concentration of 10⁷.
"Private Sewer Connection" means that part of any pipe or system of pipes lying
within the limits of the private lands and leading to the Village sewer connection
whose responsibility for maintenance is the property Owners.
"Sewage" means water carried wastes from residences, buildings and business
premises.
"Sewer" means a pipe including manholes and other appurtenances other than a
Sewer Connection in the Sewer System.
"Sewer Connection" means the sewer pipe extending from the Community Sewer
to the property line of the property being served. Where the sewer pipe is located
in an easement across other property, the sewer connection shall be the sewer
3
CONSOLIDATED TO: DECEMBER 1, 2025
pipe extending from the Community Sewer to the first property line crossed.
Where the sewer pipe is located in a statutory right-of-way, the sewer connection
shall be the sewer pipe extending from the Community Sewer to the property line
of the property being served.
"Sewer Extension" means any installation requiring the construction of a sanitary
sewer on any highway or Village right-of-way from the most convenient existing
sewer. "Extension" shall not include a Sewer Connection.
"Sewer System" means all sanitary sewer works and all appurtenances thereto,
including Sewers, Sewer Connections, pumping stations, treatment plants,
sewage lagoons and sewer outfalls laid within any highway, Village right-of-way
or Village property.
"Sludge" has the same meaning as Biosolids
"Total Suspended Solids" means solids that either float on the surface of or are in
suspension in water, Sewage or other liquids and which are removable by
laboratory filtering (as described by Standard Methods for the Examination of
Water and Wastewater, current edition).
"Village" shall mean the Village of Harrison Hot Springs or the geographic area
within its boundaries as the context requires.
"Waste Discharge Permit" means the permit to discharge Sewage to the
Community Sewer System and is issued by the Engineer or the Operations
Manager.
DECLARATION OF POLICY
3.
The Village hereby establishes a system of sewage works for the collection,
containment and disposal of Sewage, referred to as the Sewer System including
the waste water treatment plant.
PURPOSE
4
To:
(a)
regulate the use of the Sewer System;
(b)
prevent pollutants from entering the sewage system that will interfere with
normal operation, cause damage to collection or treatment systems, or
contaminate the resulting Biosolids;
4
CONSOLIDATED TO: DECEMBER 1, 2025
(c)
prevent the introduction of pollutants into the Sewer System that will not be
adequately treated and will pass through into the environment; and,
(d)
ensure protection of public and worker safety and health.
SANITARY SEWER REQUIREMENTS
5.
No person shall release or permit the release of any waste water into the Sewer
System except:
(a)
Domestic waste water;
(b)
Non domestic waste water that complies with the requirements of this Bylaw;
(c)
Trucked waste water including sewage that complies with the requirements
of this Bylaw where a Waste Discharge Permit has been issued by the
Engineer for clear water waste, subsurface water or other matter where the
Waste Discharge Permit has been issued by the Engineer; or
(d)
Extra strength waste water where a Waste Discharge Permit has been
issued by the Engineer.
(e)
No person shall release or permit the release of any prohibited substance
listed in Schedule "B" of this Bylaw into the Sewer System.
(f)
No person shall release or permit to be released any restricted substance
which exceeds the concentrations listed in Schedule "C" of this Bylaw into
the Sewer System.
APPLICATION AND ADMINISTRATION
6.
(a)
The Engineer shall administer, implement, and enforce the provisions of this
Bylaw. Any powers granted to or duties imposed upon the Engineer may be
delegated by the Engineer to other staff.
(b)
This Bylaw applies to the entire geographical area of the Village.
(c)
If a parcel of land, upon which is situated a building occupied by one or more
persons, abuts a street or land or right-of-way upon or under which there is
laid a Community Sewer, the Owner or occupier of such building shall
connect or cause to be connected, the building with the Community Sewer in
the manner provided by this Bylaw.
5
CONSOLIDATED TO: DECEMBER 1, 2025
(d)
No permit for the connection of a parcel of land to the Community Sewer
shall be issued where in the opinion of the Engineer the Community Sewer
is incapable of adequately serving the parcel of land, and in such case the
provision of Section 6 of the Bylaw shall be deemed to have been waived in
respect to that parcel of land.
APPLICATION FOR SEWER CONNECTION
7.
(a)
Before any Building Sewer is connected to a Sewer Connection or
Community Sewer, the Owner of the lands requiring such connection or his
agent shall make application to the Village, upon a prescribed form, for a
permit to connect the Building Sewer to the Sewer Connection or
Community Sewer, and pay to the Village a Sewer Connection fee as
established in Schedule "A".
(b)
A connection shall not be permitted, if, in the opinion of the Engineer, the
Community Sewer is incapable of carrying away the wastes emanating from
the Owner's premises.
(c)
When a building within the Village is removed or demolished, it shall be the
duty of the Owner or his agent to immediately apply to the Village, upon the
prescribed form, for a permit to disconnect from the Community Sewer at the
property line. The Inspector shall then cause such disconnection to be made
and forthwith plug the said connection at the property line. The fee for such
disconnection is contained in Schedule "A".
(d)
If the Owner or his agent, of any property where the sewer line has been
disconnected, wishes to re-connect to the Community Sewer, he shall make
application upon the prescribed forms for re-connection, and pay the fees as
contained in Schedule "A".
(e)
All of the Building Sewer shall be left uncovered until it has been inspected
by the Inspector.
(f)
The Owner or his agent shall test the house connection for water-tightness
in the presence of the Inspector. The test shall be performed by sealing the
building sewer at the Inspection Chamber on the property line, using an
approved plug, and then filling the line with water so that a head of not less
than 1.83 meters is placed on all sections of the Building Sewer. The rate at
which the water escapes from the Building Sewer when calculated under
this test, shall not exceed 0.45 liters per hour for each
3.05
meters
of
Building Sewer.
6
CONSOLIDATED TO: DECEMBER 1, 2025
(g)
Any existing Sewer Connection without an Inspection Chamber at the
property line shall have one installed at the Owner's cost.
(h)
If a Sewer Connection has been covered prior to inspection, the Owner shall
when requested by the Village, uncover the work so that it may be
inspected.
(i)
Where the Inspector finds that the materials or workmanship of a Building
Sewer are defective, or otherwise not in accordance with the provisions of
the Bylaw, he shall so notify the Owner who shall forthwith replace the
defective material or correct the faulty workmanship, and notify the
Inspector when the installation is again ready for inspection.
(j)
Where the Community Sewer adjoins a real property on which a building or
other structure is constructed for human occupancy or use or is intended for
human occupancy or use the Owner shall connect the Building Sewer to the
Village's Community Sewer in accordance with the provisions of this Bylaw.
(k)
Where the property has no access to the Community Sewer other than a
connection to the Village's force main and has met the conditions for such
connection, as approved by the Engineer, the Owner shall connect to the
building sewer of the building or structure to the force main in accordance
with the provisions of this Bylaw.
(l)
Where the Building Sewer of the building or structure has been connected to
the Community Sewer all Sewage from the building or structure shall be
discharged through the Building Sewer and no person shall cause or permit
any Sewage to be drained, discharged or disposed of in any other manner.
(m) Where an Owner is required by this Bylaw to connect a building or structure
to the Community Sewer and fails or neglects to connect the building or
structure in time or manner specified in this Bylaw or by notice by the
Engineer, the Village may perform the work at the expense of the Owner.
(n)
No person shall discharge, deposit or throw any of the following items to any
part of the Community Sewer
(i)
any Sewage or waste of any kind except as provided in this Bylaw;
(ii)
any substance which in the opinion of the Engineer may interfere with
the Community Sewer or Waste Water Treatment Plant;
(iii) any prohibited waste or restricted waste as set out in Schedule "B" and
"C" of this Bylaw or any contaminated wastewater as determined by
the Village Engineer.
7
CONSOLIDATED TO: DECEMBER 1, 2025
(iv) the Community Sewer will not be permitted beyond the boundaries of
the Village unless specifically authorized by resolution of Council.
PERMIT REQUIREMENTS
8.
(a)
Every holder of a Building Permit shall:
(i)
be responsible for the cost of construction and maintenance of the
Building Sewer to ensure that correct elevation of Building Sewer for
connection to the Community Sewer and where the elevation does not
permit gravity flow shall install, operate and maintain the Sewage
pumping system as approved by the Engineer.
(ii)
Notify the Village Office when the work authorized by the Building
Sewer Permit is ready for inspection and no work shall be covered until
this has been inspected and approved.
(b)
Refusal to issue a Building Sewer Permit:
(i)
The Engineer may refuse to issue a Building Sewer Permit where, in
the opinion of the Engineer:
a. The Sewer System would be incapable of handling the additional
load or the load would cause danger of Sewer overflow and plugging
of the real property;
b. The Sewage proposed to be discharged may be injurious to or may
impair the efficiency of the Sewer System or the waste water
treatment plant; and
c. The Sewage does not comply with the terms and conditions set out
in this Bylaw.
INSTALLATION OF SEWER CONNECTION AND BUILDING SEWER
9.
Upon receipt of the application to connect to the Community Sewer and payment
of the fee required in Schedule "A", the Village shall cause to be laid (unless
already laid) a Sewer Connection. Thereupon the Owner shall connect his
Building Sewer to the Sewer Connection provided, in accordance with this Bylaw.
CONNECTION TO SEWER CONNECTIONS
10
(a)
Unless otherwise directed by the Engineer, the Owner shall install the
Building Sewer to the Sewer Connection. It is the responsibility of the
Owner to ensure the Building Sewer is at the proper elevation to connect to
8
CONSOLIDATED TO: DECEMBER 1, 2025
the Village's Sewer Connection's Inspection Chamber. If the Building Sewer
is not at the correct evaluation, the Village may refuse to allow the Building
Sewer to connect to the Sewer Connection. .
(b)
The Sewer Connection fee does not include works within the property of the
applicant, except as to the first inspection of the applicant's building sewer.
(c)
No person other than the Village, their employees or their contractors shall
install or cause to be installed, any part of the Sewer Connection provided
for in this Bylaw, or in any way to break, interfere, or tamper with the
Community Sewer.
(d)
Where possible the Sewer Connection will be located at the location
requested by the applicant. In the event the applicants preferred location is
not practicable due to the existence of installed surface improvements or is
in conflict with installed underground utilities, the Engineer shall designate
the location of each Sewer Connection to each parcel of land or premises.
DISCONNECTION
11. (a)
No person shall disconnect or, in any manner, discontinue the service of any
building or structure connected to the Sewage System without the written
approval of the Engineer;
(b)
no building or structure which is connected Sewer System is to be
demolished until the building or structure is disconnected;
(c)
the Owner may first make application to the Village for a Demolition Permit,
if required, and pay the disconnection fees set out in Schedule "A";
(d)
No Owner shall discharge or permit to be discharged into the Sewer System:
(i)
hazardous wastes which can create immediate danger to any person;
(ii)
endangers or interferes with the operation of the Community Sewer; or
(iii) causes or is capable of causing adverse effect.
(e)
For this type of discharge into the Sewer System, the Engineer may, in
addition to remedies available, disconnect, plug or seal off the sewer line
discharging the unacceptable waste water into the Sewer System or take
any other action as is necessary to prevent such waste from entering the
Sewer System.
9
CONSOLIDATED TO: DECEMBER 1, 2025
(f)
The reconnection will only be approved by the Engineer when satisfied and
assured that no further discharge of hazardous waste will be made to the
Sewer System.
(g)
The costs incurred in taking such action, shall be the responsibility of the
Owner, and the Owner will immediately reimburse the Village for all costs
which have been incurred.
EXTENSION LIMITS
12. Where a Sewer is extended by other than Council resolution, the minimum inside
diameter shall be two-hundred millimeters (200mm) and shall extend from the
most convenient existing Sewer having sufficient surplus capacity and grade to
carry the additional Sewage resulting from the said extension, to a point opposite
the furthest boundary of the last parcel of land to be served by the said Sewer
Extension.
SPECIFICATIONS FOR BUILDING SEWERS
13. Each lot or potential lot must be separately and independently connected with the
Community Sewer. Where two or more buildings exist on one parcel of land and
where such parcel of land can be subdivided, each building shall have a separate
Sewer Connection.
14. The minimum diameter of every Building Sewer shall be 100 millimeters (100
mm).
15. All Building Sewers shall be installed by and at the cost of the Owner, and shall
be constructed of one of the following materials:
(a)
non-reinforced concrete sewer pipe (Latest Edition of A.S.T.M. Specification
C14 Class 3) with gasket joint conforming to ASTM C443.
(b)
Polyvinyl chloride (PVC) Pipe DR 28 for Building Sewers up to and
including one hundred and fifty millimeters (150 mm) when tested in
accordance with C.S.A. Standard B182.1m and B182.2m (A.S.T.M.
Specification D3034), integral bell and spigot ends with stiffened wall
sections and a formed groove with factory installed gasket conforming to
ASTM F477.
(c)
such other materials as the Village on the advice of its Engineer may from
time to time approve.
16. The Building Sewer shall be laid to an even slope of not less than twenty-one
millimeters (21mm) to the meters in the direction of the flow in the
case of one
10
CONSOLIDATED TO: DECEMBER 1, 2025
hundred millimeters (100 mm) lines, and not less than eleven millimeters (11 mm)
to the meter in the case of one hundred and fifty millimeters (150 mm) lines,
provided that in exceptional circumstances a slope of eleven millimeters (11 mm)
to the meter may be approved if installed under the direction of the Inspector.
17. The pipe shall be laid not less than one point five (1.5 m) below the finished
surface of the ground as measured to the top of the pipe.
18. The pipe shall be laid concentric to each adjacent pipe and the joints shall be
flush, even and free of any internal obstruction.
19. Where couplings are provided by the manufacturer as in the case of plastic pipes,
the couplings shall be installed in accordance with the manufacturer's
specifications.
20. In no case will cement mortar and oakum joints be permitted.
21. Bell and spigot pipe shall be laid with the spigot end facing the direction of the
flow.
22. Where the Building Sewer is laid over filled ground or in ground which may be
subject to settling, the Inspector may require that cast-iron soil pipe, or other
materials other than those stated in Section 13 of the Bylaw, be used.
23. At the point where the Building Sewer is joined to the Sewer Connection the
Owner shall install an Inspection Chamber, with a stopper inserted in the branch.
The stopper shall be inserted in such a way as to positively prevent the entrance
of groundwater into the sewer connection. The Engineer may require a check-
valve Inspection Chamber.
24. The pipe shall not bear any plant, timber, or other unyielding object, nor shall any
such object be placed against the pipe in backfilling.
25. Where the Building Sewer is laid near any shrub or tree whose roots may
penetrate the pipe joints, the Inspector may require that special joint material be
used.
BLOCKAGES
26. The Building Sewer shall be maintained by the property Owner at his sole
expense. Where any sewer becomes stopped or otherwise fails to function, the
Owner or occupier of the premises shall first determine that the blockage is not
located in his Building Sewer and then notify the Engineer forthwith and the
Engineer shall, as soon as practicable, arrange to have said Sewer or Sewer
Connection unstopped or otherwise restored to serviceable condition.
11
CONSOLIDATED TO: DECEMBER 1, 2025
27. Where any stoppage or failure is found to exist in the Sewer Connection or
Community Sewer and where such stoppage or other failure is found to have
been caused by the act or neglect of the Owner or occupier of the premises, all
costs incurred by the Village in restoring service and unstopping the Community
Sewer or Sewer Connection shall be paid by such Owner or occupier upon
demand and if unpaid on the thirty-first day of December of the year in which such
work is done, shall be deemed to be taxes in arrears on the property concerned
and shall be dealt with in the same manner as ordinary municipal taxes upon land
in accordance with the applicable provisions of the Local Government Act.
ABANDONMENT
28. When any Building Sewer is abandoned, the Owner or his agent shall notify the
Engineer and the Owner shall effectively block up the Building Sewer at a suitable
location at or near the connection point of the Building Sewer connection with an
approved water tight seal.
COMPULSORY CONNECTION
29
(a) Where the Owner or Owners of any parcel of land in the Village, which is
required to be connected to the Community Sewer by this Bylaw neglects,
omits or refuses to comply with the provisions of this Bylaw within a period of
thirty (30) days after the Sewer System becomes operational, the Council
may by resolution cause the Owner to be served with a written notice
requiring him to comply with this Bylaw within sixty (60) days of receipt of
such notice. If the said Owner or Owners neglects, omits or refuses to
comply with this Bylaw within sixty (60) days of receipt of such notice, then
and in that event the Owner or Owners shall be guilty of an infraction of this
Bylaw.
(b)
If the Owner of the parcel of land in the Village neglects, omits or refuses to
comply within sixty (60) days of receipt of a written notice given under
Section 16, the Council may by resolution cause the Building
Sewer
of
that parcel to be connected to the Community Sewer and cause entry to be
made upon the said parcel to do so. The total cost and expense of making
the connection, including the cost of connecting the Building Sewer to the
Sewer Connection, shall be charged against the Owner of the parcel of land.
INTERCEPTORS
30. Grease, oil, and sand interceptors shall be provided on private property for all
new garages, gasoline service stations and vehicle and equipment washing
establishments and parking lots. Interceptors may also be required for other
types of industries or commercial establishments when deemed necessary by the
12
CONSOLIDATED TO: DECEMBER 1, 2025
Engineer for the proper handling of liquid waste containing grease in excessive
amounts or any flammable wastes, sand, grit, or other harmful ingredients except
that such interceptors shall not be required for private living quarters or dwelling
units. Such interceptors shall be so located as to be readily and easily accessible
for cleaning and inspection. All interceptors shall be maintained by the Owner at
his expense in continuously efficient operation at all times.
GREASE TRAPS
31. (a)
Unless an exemption is granted under section 17, the operator and Owner of
a food service establishment must ensure that every kitchen sink and
dishwasher waste pipe in a food service establishment is connected to a
grease interceptor that complies with this Bylaw and is acceptable to the
Engineer.
(b)
The Engineer may grant a written exemption to the requirements of section
17 if the food service establishment does not discharge grease or cooking oil
to the wastewater system.
(c)
The operator and Owner of a food service establishment must ensure that
the grease interceptor required by subsection (a) is:
i)
accessible for maintenance and cleaning;
ii)
the right size for the flow capacity of the connected pipe; and
iii)
installed at the required slope to provide a minimum retention time as
required by Canadian Standards Association Standard B 481 or
successor standard.
(d)
The operator and Owner of a food service establishment must ensure that
chemical or biological additives are not added to wastewater discharged to a
grease interceptor or placed into a grease interceptor, if this increases the
quantity of grease discharged to a Sewer.
PROHIBITIONS
32
(a)
Nothing in this Bylaw shall be construed to permit the connection of surface
water to the Community Sewer. The connection, either directly or indirectly,
of roof leaders, foundation drains, field drains, sumps or any other collectors
of surface or groundwater is not permitted. The Owner of any property who
connects, permits, or causes to be connected, any such storm surface or
groundwater from his premises or property to the Community Sewer shall be
guilty of an infraction of this Bylaw.
13
CONSOLIDATED TO: DECEMBER 1, 2025
(b)
If any existing connections of surface water to the Community Sewer are
identified, the Owner of that connection shall disconnect all roof leaders from
the Sewer Connection. If alternative connections for surface water are
available for foundation drains, the foundation drains shall be disconnected
from the Community Sewer and connected to the alternative drainage
system.
(c)
In the case of any commercial or industrial premises where there exists a
possibility that wastes, as described in Schedule "B" and "C" of this Bylaw
may be discharged into the Community Sewer, a permit to connect to the
sewer shall not be issued until the Engineer has examined fully and
approved the layout and design of the protective devices to prevent or
neutralize the discharge of the said noxious wastes into the Community
Sewer.
(d)
No person shall make any connection whatsoever to the sewer or in any
way tamper with the Sewer System without first obtaining written permission
from the Engineer. No person shall discharge, deposit or throw or cause,
allow or permit to be discharged, deposited, or thrown into any sewer,
plumbing fixtures connected thereto, drain, manhole, inspection chamber or
any other part of the Sewer System, any substance of any kind whatsoever
tending to obstruct or injure the sewer works or to cause any nuisance, or
which will interfere with the proper functioning, maintenance, or repair of the
said Sewer System. No person shall maliciously, willfully, or negligently
break, damage, destroy, uncover, deface, mar or tamper with any sewer or
any of the appurtenances thereto or thereunto belonging.
(e)
No person shall discharge into any ditch, drain, creek, stream, or water
course, any Sewage, other wastes, industrial wastes, petroleum products,
coal, tar, or any refuse or substance arising from the manufacture or
processing of material and products without first obtaining written permission
to do so from the Engineer and the Medical Health Officer.
(f)
No person shall discharge into the Sewer System any water or wastes
containing higher that ordinary concentrations or quantities of compatible
pollutants, including but not limited to, biochemical oxygen demanding
pollutants, suspended solids, pH and fecal material, may be required to
discharge at a specific release rate or at a specified strength if, in the
opinion of the Engineer, the release of such a waste in an uncontrolled
manner could adversely affect proper handling and treatment in the Sewer
System.
14
CONSOLIDATED TO: DECEMBER 1, 2025
g)
No person shall discharge into the Sewer System any storm waters, surface
water, ground water, roof runoff or surface drainage or any water from air
conditioning, cooling or condensing system into the Sewage System.
(h)
No person shall discharge into the Sewer System any waters or wastes
generated during construction activities which may include but not limited to
contaminated storm water, surface water, or groundwater and wells
constructed for the purpose of lowering the groundwater table unless
specifically authorized by the Engineer.
(i)
No person shall discharge into the Village Sanitary Sewage System
detergents, surface-active agents, or other substances that may cause
excessive foaming in the Village's sanitary sewerage system.
(j)
No person shall discharge into the Village Sanitary Sewer System grease,
oils or other similar agents.
(k)
No person shall discharge any trucked waste or waste water into the Sewer
System or Waste Water Treatment Plant.
ENFORCEMENT AND PENALTIES
33. Every person who violates any of the provisions of this Bylaw, or who does any
act which constitutes a violation of any of the provisions of this Bylaw, or who
suffers or permits any act or thing to be done in contravention of this Bylaw or
who neglects or refrains from doing anything required to be done by any of the
provisions of the Bylaw shall be subject to a fine under the Bylaw Notice
Enforcement Bylaw (BNEB).
RIGHT OF ENTRY
34. The Owner of every parcel of land and the occupier of every premises shall at all
reasonable times allow, and permit the Engineer to enter into or upon lands and
premises for the purpose of inspecting the premises and sewer pipes, drains,
fixtures and any other apparatus used in connection with such Sewer Connection
or plumbing system and to observe, measure, sample and test the quantity and
nature of Sewage being discharged into the Sewer System in order to ascertain
whether or not the provisions of this Bylaw are being obeyed.
SCHEDULES
35. The following Schedules are attached hereto and form part of this bylaw:
(a) Schedule A - Sanitary Sewer Commencement and Termination Fees
(b) Schedule B - Prohibited Waste, Restricted Waste and Specified Waste
15
CONSOLIDATED TO: DECEMBER 1, 2025
(c) Schedule C - Restricted Wastes - Sanitary Sewer Discharges
REPEAL
36. The Corporation of the Village of Harrison Hot Springs Bylaw No. 612,Bylaw No.
971 and any reference to a sewer connection fee in Bylaw No. 940 are hereby
repealed in their entirety.
READINGS AND ADOPTION
"Sewer Regulation and Fee Bylaw No. 980, 2011" adopted on the 11th day of July,
2011.
Amendment Bylaw No. 985 adopted on the 19th day of September, 2011.
Amendment Bylaw No. 1000 adopted on the 16th day of April, 2012.
Amendment Bylaw No. 1032 adopted on the 15th day of April 2013.
Amendment Bylaw No. 1051 adopted on the 7th day of April, 2014.
Amendment Bylaw No. 1091 adopted on the 17th day of October, 2016
Amendment Bylaw No. 1133 adopted on the 4th day of February, 2019
Amendment Bylaw No. 1197 adopted on the 20th day of February, 2024
Amendment Bylaw No. 1233 adopted on the 1st day of December, 2025
"Ken Becotte"
"Debra Key"
Mayor
Corporate Officer
16
CONSOLIDATED TO: DECEMBER 1, 2025
1.
Sanitary Sewer Service Connection and Disconnection Fees
Connection
Single Family
$ 2,000.00* plus tax
Duplex (each unit)
$ 2,000.00* plus tax
Multi-Family & Commercial
Actual cost plus tax
Reconnection
$ 2,000.00* plus tax
Disconnection
Disconnection
Actual cost plus tax
*Costs will be based on a minimum fee of $2,000.00 plus tax at time of application. Any actual cost of the
sanitary sewer connection over and above the $2,000.00 fee will be invoiced accordingly.
2.
Sanitary Sewer Service Utility Fee
All properties identified by folio numbers that are or can be connected to the sanitary sewer system will pay the
following fee based on the actual length of the property that abuts the sewer collection main.
3. Sanitary Sewer Service User Fee
All properties connected to the sanitary sewer system will pay the user fees, in the amounts set out in the table
below, effective January 1 of the year stated:
Residential
2026
2027
Residential Unit (per unit)
$312.94
$337.98
Secondary Suite (per suite)
$156.47
$168.99
Commercial / Community
2026
2027
Barbershop, Beauty Salon
$738.55
$797.63
Campground (per campsite)
$124.49
$134.45
- Sani-dumps
$124.49
$134.45
- Washrooms fixtures
$83.46
$90.13
Church
$292.08
$315.44
Coin Laundry (per machine)
$78.44
$84.72
Hotel/Motel (per room)
$179.42
$193.77
Laundry
$11,200.60
$12,096.65
Liquor Primary (per person)
$22.25
$24.03
Office
$292.08
$315.44
Repair Shop
$292.08
$315.44
Restaurant/Café
$556.34
$600.85
- First 400 ft² (37.16 m²) of
floor space
- For each additional 100 ft²
(9.3m²) or portion thereof
of floor space
$139.09
$150.22
SCHEDULE "A"
Bylaw No. 1233, 2025
Annual Fees and Charges
Pursuant to Section 194 of the Community Charter the following annual fees and charges
(January 1 - December 31) are imposed in accordance with the terms and conditions approved by Council:
2026 Rate
Minimum
Maximum
$ 10.02/metre
18 meters
30 metres
2027 Rate
Minimum
Maximum
$ 10.82/metre
18 metres
30 metres
17
CONSOLIDATED TO: DECEMBER 1, 2025
Retail Establishment
$292.08
$315.44
School (per classroom)
$358.84
$387.55
Service Station
$585.54
$632.39
Storage/Maintenance Shop
$208.62
$225.31
All properties connected to the sanitary sewer system will pay the user fees, in the amounts set out in the table
below, effective January 1 of the year stated:
4.
Pool/Hot Tub/Spa User Fee
Pools/Spas
2026
2027
*Class 1 Pool
Commercial/Recreational
$4,577.32
and/or metered
discharge
$4,943.51 and/or
metered discharge
Metered Discharge Rate/m³
$1.39
$1.50
*Class 2 Pool
Commercial/
Recreational/
Multi-Unit Residential
$2,086.29
$2,253.19
*Class 3 Spa
$1,836.97
$1,983.93
*Class 4 Hot Tub - Commercial/
Recreational/ Multi-Unit
Residential
$1,043.15
$1,126.60
*Class 1 - Spa Pool or Public Pool that discharges on a regular basis
*Class 2 - Pool intended for shared use by more than one person; ie pool located at a campground, multi-unit building, motel/hotel, apartment
building, townhouse complex that does not discharge on a regular basis and is not metered
*Class 3 - Spa
*Class 4 - Hot Tub intended for shared use by more than one unit; ie located at a campground, multi-unit building, motel/hotel, apartment
building, townhouse complex that does not discharge on a regular basis and is not metered
5. Waste Discharge
Waste Discharge Permit Application
$ 350.00
Waste Discharge Fee per cubic metre
$ 1.39/m³
6. Billing Cycle and Penalties
Commercial Fees are billed quarterly, Residential Fees are billed annually.
A 10% penalty will be applied to any unpaid balance on the fees and charges outstanding by the due date.
Any fees and charges remaining unpaid by the end of the calendar year shall be deemed to be taxes in
arrears.
18
CONSOLIDATED TO: DECEMBER 1, 2025
SCHEDULE "B"
PROHIBITED WASTE, RESTRICTED WASTE AND SPECIFIED WASTE
1.
No person shall discharge directly or indirectly or deposit or cause or permit the
discharge or deposit of wastewater into a sanitary sewer, Village of Harrison Hot
Springs or private sewer connection to the sanitary sewer system in
circumstances where:
(1)
To do so may cause or result in:
(a) a health or safety hazard to a person authorized by the Village of
Harrison Hot Springs to inspect, operate, maintain, repair or otherwise
work on the Sanitary Sewer System;
(b) an offence under the Provincial Environment Protection Act, as
amended from time to time, or any regulation made thereunder;
(c) wastewater sludge from the Wastewater Treatment Plant works to
which either wastewater discharges, directly or indirectly, fail to meet
the objectives and criteria as listed in the Provincial Environment
Protection Act, as amended from time to time;
(d) interference with the operation or maintenance of the Sanitary Sewer
System, or which may impair or interfere with any wastewater
treatment process;
(e) a hazard to any person, animal, property or vegetation;
(f)
an offensive odour to emanate from the Sanitary Sewer System, and
without limiting the generality of the foregoing, wastewater containing
hydrogen sulphide, carbon disulphide, other reduced Sulphur
compounds, amines or ammonia in such quantity as may cause an
offensive odour;
(g)
damage to the Sanitary Sewer System;
(h)
an obstruction or restriction to the flow in the sanitary sewer system.
(2)
The wastewater has 2 or more separate liquid layers.
(3)
The wastewater contains:
(a)
hazardous substances;
(b)
combustible liquid;
19
CONSOLIDATED TO: DECEMBER 1, 2025
(c)
biomedical waste, including any of the following categories: human
anatomical waste, animal waste, untreated microbiological waste,
waste sharps and untreated human blood and body fluids known to
contain viruses and agents listed in "Risk Group" as defined in
"Laboratory Biosafety Guidelines" published by Health Canada, dated,
2004.
(d)
specified risk material for bovine spongiform encephalopathy as
defined in the federal Fertilizers Regulations (C.R.C., c. 666), as
amended from time to time, including material from the skull, brain,
trigeminal ganglia, eyes, tonsils, spinal cord and dorsal root ganglia of
cattle aged 30 months or older, or material from the distal ileum of
cattle of all ages.
(e)
dyes or coloring materials which may or could pass through the
Sanitary Sewer System and discolor the Wastewater Treatment Plant
effluent;
(f)
fuel;
(g)
ignitable waste.
(h)
pathological waste.
(i)
PCBs.
(j)
pesticides which are not otherwise regulated in this Bylaw.
(k)
reactive waste.
(l)
toxic substances which are not otherwise regulated in this Bylaw.
(m) waste radioactive substances in excess of concentrations greater than
those specified for release to the environment under the Nuclear
Safety and Control Act and Regulations as amended from time to time.
(n)
solid or viscous substances in quantities or of such size to be capable
of causing obstruction to the flow in a sewer, including but not limited to
ashes, cinders, sand, mud, soil, straw, shaving, metal, glass, rags,
feathers, tar, plastics, wood, unground garbage, animal parts or
tissues, and paunch manure.
20
CONSOLIDATED TO: DECEMBER 1, 2025
SCHEDULE "C"
RESTRICTED WASTES - SANITARY SEWER DISCHARGES
Table A - CONVENTIONAL CONTAMINANTS & PHYSICAL PARAMETERS
Substance
Concentration Limit -
[mg/L, except as noted]
Biochemical Oxygen Demand
500
Oil and grease - animal and
vegetable
150
Oil and grease - mineral and
synthetic/hydrocarbon
15
Total Suspended Solids
300
pH
5.5 - 9.5
Temperature
60 Degrees Celsius
Table B - ORGANIC CONTAMINANTS
Substance
Concentration Limit - [mg/L,
except as noted]
Benzene
0.01
Chloroform
0.04
Dichlorobenzene (1,2-)
0.05
Dichlorobenzene (1,4)
0.08
Ethylbenzene
0.16
Hexachlorobenzene
0.0001
Methylene chloride
(dichloromethane)
0.2
PCBs (chlorobiphenyls)
0.004
Phenols, Total (or Phenolic
compounds)
0.1
Tetrachloroethane (1,1,2,2-)
1.4
Tetrachloroethane
1.0
Toluene
1.0
Trichloroethylene
0.02
Xylenes, total
0.04
21
CONSOLIDATED TO: DECEMBER 1, 2025
Table C - INORGANIC CONTAMINANTS
Substance
Concentration Limit - [mg/L,
except as noted]
Arsenic, total
1.0
Cadmium, total
0.2
Chromium, total
4.0
Cobalt, total
5.0
Copper, total
2.0
Cyanide, total
1.0
Lead, total
1.0
Mercury
0.05
Molybdenum, total
1.0
Nickel, total
2.0
Nitrogen, Total Kjeldahl
100
Phosphorus, total
10
Selenium, total
0.8
Silver, total
1.0
Sulphide (as H2S)
1.0
Zinc, total
3.0